Faint signals are no longer a challenge for DXers and Contesters around the world, with the new IC-7610. The difference between putting the QSO in the log or trying another time is the capability of your receiver. The high performance RMDR in the IC-7610 has the ability to pick out the faintest of signals even in the presence of stronger, adjacent signals. The IC-7610 introduces dual RF direct sampling receivers. Achieving 100dB RMDR, these receivers rival that of other top-of-the-line transceivers. The IC-7610 also comes with a high-speed, high-resolution, real-time spectrum scope on a 7-inch color display.

Output Power: 100W (25W AM)
RX Frequencies: 0.030-60.00MHz
Receiver Type: Direct sampling


RF Direct Sampling System
The IC-7610 employs an RF direct sampling system, where RF signals directly convert to digital data and then processed by the FPGA (Field-Programmable Gate Array). This process reduces distortion that naturally occurs in the various mixer stages found in traditional superhetrodyne receivers.

The RF Direct Sampling System in the IC-7610 is capable of 110 dB* RMDR. This performance gives you the ability to pull weak signals out of the noise of strong adjacent signals. There is a difference you can actually hear as the desired signal comes out of the pileup!

Independent Dual Receiver
Whether listening to both sides of DX station running split, or looking for a multiplier on a different band or mode, the dual receivers in the IC-7610 have you covered. Two separate DIGI-SEL preselectors, two separate Band Pass Filter networks, feed two separate A/D converters into the FPGA.

Dual Digi-Sel
The DIGI-SEL preselectors are RF filters with sharp, narrow passband characteristics preventing Analog-to-Digital Converter overflow from large out-of-band signals when sampling the RF signals. Additionally the third and higher order IMD components are reduced. This is ideal when strong signals are received in a contest pile-up or from broadcast stations on adjacent frequencies or bands.

Large Color Touch Screen
The large 7" color TFT touch LCD offers intuitive operation of functions, settings, and various operational visual aids such as dual spectrum scope aligned vertically or horizontally, simulated analog meters and RTTY, PSK31/63 mode decoded messages.The combination of the touch screen and the multi-dial knob offers quick and smooth operation. When you push the multi-dial knob, menu items are shown on the right side of the display. You can select an item by touching the screen and can adjust the levels by turning the multi-dial knob.
Additional Features:
Built-in automatic antenna tuner
Digital-Up-Conversion (DUC) for clean transmit
Dual receivers, dual spectrum scopes
DVI-D connector for an external display
SD memory card slot for saving data
I/Q signal output
Memo pad stores up to 10 operating frequencies and modes
Quick split function
Quick Dualwatch function
RF gain and squelch control with a knob
RIT and ΔTX variable up to 9.999 kHz
UTC/local clock and timer function
1 Hz pitch tuning and display
Dial lock function
Adjustable main dial brake
External speaker jacks for Main and Sub receivers
Screen saver function
Multi-function meter (S-meter, Power, ALC, COMP, SWR, ID, VD and TEMP)
Auto tuning step function

DOWNLOAD THE BROCHURE

SPECIFICATIONS

General
Frequency coverage
Rx
Tx

0.030– 60.000 MHz*1
1.800–1.999, 3.500–3.999, 5.255–5.405*2 
7.000–7.300, 10.100–10.150, 14.000–14.350, 
18.068–18.168, 21.000–21.450, 24.890–24.990, 
28.000–29.700, 50.000–54.000 MHz
*1 Guaranteed range: 0.500–29.999, 50.000–54.000 MHz.
*2 Some frequency bands are not guaranteed.
 
Mode USB, LSB, CW, RTTY, PSK31/63, AM, FM
Number of channels 101 (99 regular, 2 scan edges)
Antenna connectors SO-239 × 2 (50 Ω unbalanced (Tuner off))
BNC × 1 (RX antenna In/Out)
Power supply requirement 13.8 V DC ±15%
Operating temperature range 0°C to +50°C; +32°F to +122°F
Frequency stability Less than ±0.5ppm
(0°C to +50°C, after warm up)
Frequency resolution 1 Hz (minimum)
Power consumption
TX
RX

23 A (at 100 W output power)
3.0 A (Standby), 3.5 A (Maximum audio)
Dimensions (W×H×D)
(projections not included)
340 × 118 × 277 mm;
13.4 × 4.6 × 10.9 in
Weight (approx.) 8.5 kg; 18.7 lb
Transmitter
Output power (HF/50 MHz) SSB/CW/FM/RTTY/PSK: 1–100 W 
AM: 1–25 W Digital P.S.N.
Modulation system
SSB
AM
FM
  
Digital P.S.N. modulation
Digital low power modulation
Digital Reactance modulation
Spurious emission
HF Bands
50 MHz band

Less than –50 dB
Less than –63 dB
Carrier suppression More than 50 dB
Unwanted sideband More than 50 dB
Microphone impedance 600Ω (8-pin connector)
Receiver
Receiver system Direct Sampling Superheterodyne
Intermediate frequencies 12 kHz
Sensitivity*3
SSB/CW (at 10 dB S/N)
AM (at 10 dB S/N)
FM (at 12 dB SINAD)

0.5– 1.799 MHz

6.3 μV typ.

1.8– 29.999 MHz
0.16 μV typ.
2.0 μV typ.

28.0– 29.7 MHz


0.5 μV typ.

50–54 MHz
0.13 μV typ.
1.0 μV typ.
0.32 μV typ.

*3 HF: Preamp 1 ON, 50 MHz: Preamp 2 ON, BW: SSB/CW=2.4 kHz, AM=6 kHz, FM=15 kHz

Squelch sensitivity (Threshold) SSB: Less than 3.2 μV (Preamp ON)
FM: Less than 0.32 μV (Preamp ON
Selectivity (Filter shape: Sharp) 
SSB (BW: 2.4 kHz)
CW (BW: 500 Hz)
RTTY (BW: 500 Hz)
AM (BW: 6 kHz)
FM (BW: 15 kHz)

More than
2.4 kHz/–6 dB
500 Hz/–6 dB
500 Hz/–6 dB
6.0 kHz/–6 dB
12.0 kHz/–6 dB

Less than
3.6 kHz/–60 dB
700 Hz/–60 dB
700 Hz/–60 dB
15 kHz/–60 dB
20 kHz/–60 dB

Spurious and image rejection ratio
HF bands
50 MHz band

More than 70dB
More than 70 dB (Except for ADC Aliasing)
Audio output power More than 2.6W at 10% distortion with an 8Ω load
Tuner
Frequency range 1.9–50 MHz bands
Matching impedance range 16.7 Ω–150 Ω unbalanced (VSWR better than 3: 1)
Tuning accuracy VSWR 1.5: 1 or less
Tuning time 2–3 seconds (average) (Maximum 15 seconds)

All stated specifications are subject to change without notice or obligation.

Supplied Accessories

  • Hand microphone, HM-219
  • DC power cable
  • Fuses
  • Plugs

 


Customers who bought this product also purchased

Manufacturers
Icom IC-R15
Icom IC-R15
€ 529,00
€ 485,00

    0 items

Quick Find
Languages
Ελληνικά English
Share Product
Share on Facebook
We Accept
Manufacturer Info