The SE-X80 is an end fed aluminium vertical antenna, capable of allowing the user to work 80 meters through 6 meter bands using an ATU, also not requiring any counterpoise and can be fed using coax cable.
The antenna can be pole mounted at ground level or elevated depending on the user personnel requirements. The antenna is rated at 300 watts pep. The antenna comes complete with all fixings and fixtures and full installation guide.
How it works: The antenna is fed using coax via an SO239 socket at the base of the unit a UN-UN transformer is located in a weather sealed box at the bottom of the 6 meter telescoping aluminium element.
The transformer reduces the high impedances generated to a more acceptable level making the antenna much more efficient and allowing proper and easy tuning via a manual and most automatic ATU's.
The antenna can be grounded if the user experiences excessive local static noise, but as the UN-UN is DC grounded, grounding will not effect the tuning ratio's.
- Type End fed vertical
- Frequency TX / 3.5 - 50 MHz
- RX / 1.8 - 55 MHz
- Power handling 300 watts pep
- Impedance 50 Ohms
- Connector SO-239
- Length 6 meters