The product is on limited supply and available only after specific order.
Aim higher and enter the world of SHF. The IC-905 is an industry-first all-mode transceiver with 144/440/1200/2400/5600 MHz coverage. Add 10 GHz with the optional CX-10G transverter.
Output Power:
10W on 144 / 430 / 1200 MHz; 2W on 2400 / 5600 MHz; 0.5W on 10 GHz*
*Requires CX-10G transverter
GPS: Built-in
- The industry first VHF/UHF/SHF all mode transceiver with 144/430/1200/2400/5600 MHz and 10 GHz* coverage.
- Output power of 10 W for 144-1200 MHz, 2 W for 2400 and 5600 MHz, as well as 0,5 W for 10 GHz*.
- Color LCD touch display, waterfall and intuitive menu modelled after the IC-705.
- Power over Ethernet (PoE) technology improves the RF-module installation
- ATV (Amateur TV)
*10 GHz possible with the optional CX-10G transverter
PRELIMINARY SPECIFICATIONS
| GENERAL |
| Type: |
Amateur VHF/UHF/SHF transceiver |
| Frequency range: |
Europe
TX: 144-146 / 430-440 / 1240-1300 / 2300-2450 / 5650-5850 MHz
RX: 144-146 / 430-440 / 1240-1300 / 2300-2450 / 5650-5850 MHz
USA
TX: 144-148 / 420-450 / 1240-1300 / 2300-2450 / 5650-5925 MHz
RX: 144-148 / 420-450 / 1240-1300 / 2300-2450 / 5650-5925 MHz
3 cm / 10.0-10.5 GHz option (CX-10G) |
| Tuning steps: |
? KHz |
| Frequency stability: |
GPS stabilized OCXO |
| Mode: |
AM / FM / SSB / CW / RTTY / DV & DD (D-Star) / FM-ATV |
| Channels / memory management: |
|
| Repeater shift / offset: |
Programmable |
| Power supply: |
13.8 VDC (Barrel connector) |
| Current drain / power consumption: |
RX: ? mA
TX: ? A |
| Antenna impedance / connector: |
2 m/70 cm/23 cm
50 ohm / N-jack
13 cm
50 ohm / SMA
6 cm
50 ohm / SMA
(There is also an SMA connector for the GPS antenna) |
| Dimensions (W*H*D): |
Controller: ? mm (?")
RF module: ? mm (?") |
| Weight: |
Controller: ? Kg (? lb)
RF module: ? Kg (? lb) |
| Other features: |
Analog A/V in/out for ATV. SD-card slot. USB-C connector. LAN ports.
4.3" touch screen color display. Spectrum scope and waterfall. 48 V PoE.
IPX5 weatherproof outdoor RF unit. |
| |
|
| |
|
| RECEIVER SECTION |
| Receiver system: |
|
| Sensitivity: |
|
| Selectivity: |
|
| Image rejection: |
|
| AF output power / speaker: |
? W at ?% distortion / ? ohm |
| External speaker connector: |
3.5 mm |
| |
|
| |
|
| TRANSMITTER SECTION |
| RF output power: |
| 2 m: |
10 W |
|
| 70 cm: |
10 W |
|
| 23 cm: |
10 W |
|
| 13 cm: |
2 W |
|
| 6 cm: |
2 W |
|
| 3 cm: |
500 mW |
(With optional CX-10G using 13 cm (2.4 GHz) IF) |
|
| Modulation system: |
|
| Max FM deviation (Factory set): |
FM: ±5 KHz
NFM: ±2.5 KHz |
| Spurious emissions: |
Better than -? dB |
| Microphone impedance / connector: |
? ohm / ?-pin (3.5 mm) |
| Microphone input level: |
? mV |
| |
|
| |
|
| MISCELLANEOUS |
| Manufactured: |
Japan, 2023-202x |
| Additional info: |
This system consists of a controller in IC-705 style, connected to an outdoor
IPX5 waterproof RF module via LAN cable, adopting PoE technology. This
effectively eliminates coax cable losses. For ultimate frequency accuracy and
stability, the system is controlled by a 1 PPS clock signal from a built-in
GNSS/GPS receiver. |
| Related documents: |
The SHF band challenge, vol 1-4 (4.6 MB) |
| Modifications and fixes: |
|
| Reviews: |
|
| Options / Accessories: |
AH-24
AH-56
AH-100
CX-10G |
13 cm (2.4 GHz) collinear antenna
6 cm (5.6 GHz) collinear antenna
3 cm (10 GHz) collinear antenna
3 cm (10 GHz) transverter module |
|
