Accessories
Diamond Antenna SX-600 SWR/Power Meter
The Diamond SX-600 is a back lit SWR/Wattmeter covering 1.8-160 MHz.…
- Manufacturer
- Diamond Antenna
- Model
- 22-311-8956
Daiwa CS-201A
The Daiwa CS-201A is a heavy duty two position coax switch, good for…
- Manufacturer
- DAIWA
- Model
- 22-193-5112
Daiwa CS-201GII
The Daiwa CS-201 GII is a two position switch n-type. Unused positions are…
- Manufacturer
- DAIWA
- Model
- 22-311-9928
Scapa 2501 self-amalgamating tape, 10m, 25mm
Ideal for jointing and repairing power cables up to 69kV. For insulation, waterproofing and protection of electrical connections…
- Manufacturer
- Scapa
- Model
- 22-328-16199
Scapa 2547 self-amalgamating tape, 10m, 19mm
Ideal for jointing and repairing power cables up to 69kV. For insulation, waterproofing and protection of electrical connections…
- Manufacturer
- Scapa
- Model
- 22-328-9185
MFJ-16C01 Ceramic insulator
Ceramic insulator. Can be used as an end or centre insulator. This insulator will not arc over, even…
- Model
- 22-266-12656
Balun 1:6 (1000W)
High performance balun. Frequency range 1 to 30MHz, Impedance: 50Ohm, Ratio: 1:6, max. power load: 1000W SSB/CW.…
- Model
- 22-311-11068
Dog Bone Insulator Large (black)
Dog Bone insulator (large) black, can be used as an end or centre insulator. Will not break with long…
- Model
- 22-329-12162
Black Insulator 38mm
Very strong 38mm black insulator for antenna installations. …
- Model
- 22-288-14473
DC Distribution Board PW-100 CG Antenna
DC Board with individual fuses. The 4 outputs of the new 4-way DC-Board PW-100 are separated secured…
- Model
- 22-288-14662
Power Cable 6 pole for ICOM, ALINCO, YAESU etc
6 Pole power cable for various ICOM, ALINCO, YAESU and KENWOOD transceivers. …
- Model
- 10-165-17935
Power Cable 4 pole for ICOM, ALINCO, YAESU etc
4 Pole power cable for various ICOM, ALINCO, YAESU and KENWOOD transceivers. …
- Model
- 22-288-14519
Nevada DPC-1 dipole centre
High Quality Dipole Centre
Ideal for all your wire antenna projects, this is a really good, strong…
- Model
- 22-184-15588
Kelemen Balun 1:9 1KW
Our baluns have a bolted, clear polycarbonate case and are not filled with insulating plastic like other baluns.…
- Model
- 22-288-15957
ICOM MBA-4 FOR IC-2730
The Icom MBA-4 is a bracket to connect the controller to the radio…
- Manufacturer
- Icom
- Model
- 22-165-16389
ICOM MBA-5 FOR IC-2730
The Icom MBA-5 bracket is for the control head of the IC-2730A.
The MBA-5 holds the radio's…
- Manufacturer
- Icom
- Model
- 22-165-16390
ICOM MBF-1 Mount Base for IC-2730, ID-5100 etc
The Icom MBF-1 is an optional suction cup mounting base for easy installation of the…
- Manufacturer
- Icom
- Model
- 22-288-14598
0 items
