ECOFLEX 10 is a flexible, low-loss coaxial cable specifically designed for use up to 6 GHz. Advanced manufacturing techniques combined with the use of a low-loss PE-LLC Dielectric yields a foaming rate of more than 70% resulting in very low attenuation.

ECOFLEX 10 sets the new standard between flexible coaxial cables. The flexibility of ECOFLEX® 10 is further enhanced through the use of a stranded, oxygen-free copper center conductor. Use of proprietary techniques, continuous center conductor calibration and compression as well as the application of a precoating results in low losses and good impedance matching. Further advantages of the cable include the use of double shielding which is constructed of overlapping copperfoil plus an additional tight woven copper braid. A screening efficiency of > 90 dB@ 1 GHz is realized. ¨

Click here for ECOFLEX-10 specifications PDF (185kb)

Ecoflex-10 Connectors
Photographs	Type	Assembly-Instruction
	Connector N type (male)	PDF Document (121kb) CLICK HERE
	Connector  N type solderless  (male)	PDF Document (110kb) CLICK HERE
	Connector N type (female)	PDF Document (126kb) CLICK HERE
	Connector N type right angle (male)	PDF Document (197kb) CLICK HERE
	Connector BNC (male)	PDF Document (141kb) CLICK HERE
	Connector UHF (male)	PDF Document (83kb) CLICK HERE
	Connector TNC (male)	PDF Document (151kb) CLICK HERE
	Connector TNC reverse polarity	PDF Document (233kb) CLICK HERE

Specifications

• Impedance: 50 Ohm.
• Capacity:  78 pF/m.
• Velocity factor: 0,85. 
• Screening efficiency@ 1 GHz: >90 dB.
• Center conductor stranded copper: 7x1,0 mm.
• Dielectric:  PE, low-loss Compound.
• Diameter over sheath: 10,2 mm. 
• min. bending radius: 40 mm. 
• Weight (100m): 13,1 kg.

Max. power handling (W @ 40°C)

• 10MHz 3960
• 100MHz  1210
• 1000MHz 350

Typ. attenuation (dB @ 20°C)

Frequency	100m	100ft
100MHz	4,0	1,22
500MHz	9,6	2,93
1000MHz	14,2	4,33
2000MHz	21,2	6,46
2400MHz	23,6	7,2
3000MHz	27,0	8,23
4000MHz	32,2	9,82
5000MHz	37,0	11,28
6000MHz	41,5	12,65